Valve Descriptions
BV100, BIDET DIVERTER VALVE
A 3/8 DEVERTER VALVE FOR BIDET FEATURING AN ENTEGRAL ATMOSPHERIC VACUUM BREAKER.
MADE FROM ENGINEERED CARBON PLASTIC MATERIAL, CORROSION-RESISTANT.
MINIMUM CONTINUE FLOW ON THE SPRAY WHEN ON RIM MODE.
MINIMUM CONTINUED FLOW ON THE RIM WHEN IN THE SPRAY MODE.
THE HOT WATER OF THE BIDET WILL WARM THE BIDET COLD RIM.
THE CONTINUOUS WATER FLOW FROM THE RIM MAINTAINS THE BOWL CLEAN.
INSTALLING A THERMOSTATIC VALVE IS HIGHLY RECOMMENDED TO PROTECT A USER FROM GETTING BURNED FROM HOT WATER OR SHOCKED BY THE COLD FROM A SUDDEN TEMPERATURE CHANGE FROM THE PRESET WATER TEMPERATURE.
OMNIBRASS IS PLEASED TO OFFER SPECIAL CUSTOM-MADE FITTINGS AVAILABLE FOR SIMPLIFYING AND TIME-SAVING INSTALLATIONS.
- IS A ¾ BACK FLOW LOW PREVENTER AND NOT A STOP VALVE.
- BRASS BODY WITH TWO OUTLETS
- OUTLETS, THE ¾ TO SPOUT, THE 3/8 FOR THE HAND SHOWER
- THE INLET AND SPOUT PORTS ARE RIMMEN FOR ¾ COPPER PIPE
- VALVE AND SPOUT OUTLETS, THE THREAD IS A ¾ N.P.T.
- VALVE AND SPOUT INLET, ARE ¾ RIMMED FOR COPPER PIPE
- THE HAND SHOWER INLET/OUTLET THE THREAD IS 3/8 N.P.T.
- REPLACING PARTS CAN BE DONE FROM THE TOP
- THE VALVE HAS TWO CUSTOM MADE PARABOLIC O-RING
- THE TWO PARABOLIC O-RING ARE FOR LONG LIFE USAGE AND FOR A COMFORTABLE OPERATION
BV631-SHOWER DIVERTER
A BRASS VALVE BODY WITH FOUR ½" PORTS.
PORTS: THE INSIDE IS FOR ½" SOLDERING COPPER PIPE.
PORTS: THE OUTSIDE IS N.P.T. THREADED.
CARTRIDGE IS AN ENGINEERED CARBON GLASS MATERIAL.
THE VALVE HAS TWO SPECIAL STAINLESS STILL STOP WASHERS.
ONE WASHER CONTROLS TWO PORTS, THE LEFT OR RIGHT HAND.
ONE WASHER CONTROLS THREE PORTS.
SMOOTH SWITCHOVER FROM PORT TO PORT.
SPLINE: STANDARD IS A 20-TOOTH. HOWEVER, CUSTOMERS CAN CUSTOM ORDER.
SPLINE: CAN BE REPLACED AT ANY TIME WITHOUT DAMAGING EXISTING FINISHED ARE.
SPLINE: TRIM EXTENSION IS NEVER REQUIRED.
NOTE: IF ONLY 2 PORTS ARE USED, THEN CAP THE ONE NOT USED.
IS A 1/2 SHOWER DIVERTER and NOT A STOP VALVE.
BV635-SHOWER DIVERTER
A BRASS BODY VALVE WITH FOUR ½" PORTS.
PORTS: THE INSIDE RIMMED FOR ½" COPPER PIPE SOLDERED.
PORTS: THE OUTSIDE IS N.P.T. THREADED.
CARTRIDGE: A CERAMIC DISC.
THE VALVE HANDLE TURNED 360 DEGREES LEFT OR RIGHT.
SMOOTH SWITCHOVER FROM PORT TO PORT.
SPLINE: STANDARD IS A 20-TOOTH. HOWEVER, CUSTOMERS CAN CUSTOM ORDER.
SPLINE: CAN BE REPLACED AT ANY TIME WITHOUT DAMAGING EXISTING FINISHED ARE.
SPLINE: TRIM EXTENSION IS NEVER REQUIRED.
NOTE: IF ONLY 2 PORTS ARE USED, THEN CAP THE ONE NOT USED.
IS A 1/2 SHOWER DIVERTER and NOT A STOP VALVE.
BV202.10 VACUUM BREAKER
RIM-MOUNT ½" VACUUM BREAKER.
BRASS BODY, CORROSION RESISTANCE COMPONENTS.
COMPONENTS ARE EASILY ACCESSIBLE FROM ABOVE THE DECK.
CONNECTION, FOR ½" COPPER PIPE.
AVAILABLE IN CROME FINISHES.
IDEAL TO BE USED CLEANING AND DISINFECTING WHIRLPOOLS.
COMPLY WITH C.S.A. AND ASSE STANDARD.
BV1000-SIENA SHOWER COLUMN
THE SIENA IS A NEW, PATENT, AND INNOVATIVE SHOWER COLUMN DEVELOPED FOR THE ENTIRE FAMILY TO ENJOY SHOWERING IN COMFORT AND RELAXATION.
THE MAIN POINTS OF CONCENTRATOIN WERE THREE,
COMFORT, FUNCTIONAL AND ELEGANT
FOR COMFORT, THE COLUMN BENT IS ON THE TOP OF THE COLUMN, SOTHE COLUMN IS STRAIGHTER, LONGER AND PREVENTS THE HOSE FROM DANGLING IN FRONT OF THE EXISTING TUB-SHOR FAUCET.FUNCTIONAL, HANDHELD SHOWER WAND CAN BE INSTALLED ONTO EXISTING TUB SHOWER FITTING, WITHOUT DAMAGING EXISTING FINISHED WALL. THE HANDHELD WAND HAS MANY FUNCTIONS, AND FOR EASY CLEANING, THE SHOWER HEAD HAS SOFT TIPS.
ELEGANT, WHEN THE SIENA SHOWER COLUMN IS FINALLY PROPERLY INSTALLED, IT WILL ADD A GORGEOUS LOOK TO THE WASHROOM/BATH TUB, AND A VERY SATISFYING SHOWERING EXPERIENCE.
